Air Particle Counter

p6n
  • Looking something below than 0.1um? Try this NPC10 with 10 nm sensitivity and 2.83 LPM sample flow rate
  • Up to 2,000 hours continuous run time without need of isopropyl alcohol…
p1n

Annoyed with frequent breakdown and high maintenance of your 0.1μm particle counter? Try out this highest concentration limit 0.1μm Particle counter with robust IR touch screen…

p3n

From 0.3μm particle counter with (6 channels) with 1 CFM flow rate. Features with Location identification scanner and etc…

p5n

Thinking of low cost particle counter for troubleshooting and quick particle check? HandilazMini with 0.1cfm flow rate just fit to your requirement…

p4n

Online monitoring can be very easy with this Plug and Play remote sensor…

p2n

Remote particle sensor with various size range and flow controller for accuracy measurement…

 

Liquid Particle Counter

Now with the latest technology down to with 0.02μm size measurement for your super ultra pure water…

The technology you can trust on with 0.05μm size measurement for your super ultra pure water…

Spectrometer grade Liquid particle counter from range 0.2um to 125um. Available for insitu monitoring or laboratory analysis for your chemical and UPW with up to 80ml/min true sample viewing volume…

p8n
  • Complying to all USP, EP, JP standard with sizing capability from 1.5 to 125μm
  • The lowest sample volume in market at 0.4ml.
  • Comes with FDA 21 CFR 11 SamplerSight Pharma.

 

Chemical Particle Counter

NanoVision Technology® to measure 40nm particles in chemicals especially high molecular scattering fluids (PGMEA, Photoresist solvents, HF, Sulfuric or etc). 3 years warranty with low operation cost.

NanoVision Technology® to measure 100nm particles in chemicals especially high molecular scattering fluids (PGMEA, Photoresist solvents, HF, Sulfuric or etc). 3 years warranty with low operation cost.

  • 4 channels at 0.1, 0.2, 0.5 and 1.0μm size range
  • Compatible with corrosive liquids, including hydrogen fluoride (HF)
p11n
  • Uses vacuum to fill sample vessel, then pressurizes to count particles without bubbles
  • Enables efficient sampling of chemicals from sample bottles, chemical containers, or process baths

 

Airborne Molecular Contamination

  • High-sensitivity detection of acids and bases (amines, ammonia and chlorides)
  • Versatile product configuration for point-of-use, multi-point and mobile monitoring applications
  • Compact size allows placement in any location
  • Ethernet, RS-232, 4-20 mA outputs
  • Monitors up to 30 sample locations
  • Features AirSentry II ion mobility spectrometry (IMS) sensors—sensitive, reliable, repeatable
  • Detection of low concentrations of acids, amines, ammonia and chlorides
  • Monitors up to 30 sample locations
  • Features AirSentry II ion mobility spectrometry (IMS) sensors—sensitive, reliable, repeatable
  • Detection of low concentrations of acids, amines, ammonia and chlorides
  • High-sensitivity AirSentry II ion mobility spectrometry (IMS) analyzers detect acids, amines, ammonia and chlorides
  • Mobile cart – move the system quickly to high-priority sample locations
  • Onboard compressor, air-dryer, chemical filter and vacuum pump
  • Battery back-up enables over 30 minutes of uninterrupted sampling, even during transport

Gas Particle Counter

hpgp
  • 0.1 μm sensitivity at 0.1 SCFM
  • 8 particle channels
  • Line pressures from 40 to 150 psig
  • Passive laser cavity
  • Parallel processing array detector system
  • Safety containment vessel
  • Simultaneous dual probe operations
  • Oxygen and hydrogen compatibility

Total Organic Carbon

  • TAC-Accura (0.1-999.99ppb)
    Semiconduct Super Ultra Pure Water
  • TAC-Accura SX (0.01 – 30.000ppb)
    Semiconduct Super Ultra Pure Water
  • TAC-Evolution II (0-50ppm)
    Semiconductor Waster Water / Recycle Water
    Food & beverages Environmental Drainage